9 in stock
Everfil™ABS is a state-of-the-art filament that combines the characteristics of traditional ABS with a matte surface finish and exceptional printability. Thanks to its special ABS formulation, it offers all the advantages of acrylonitrile butadiene styrene, such as high strength, thermal stability and excellent film adhesion, while minimising common ABS printing problems such as shrinkage and warpage. Everfil ABS is designed to provide users with excellent print quality without the need for advanced printer settings.
Diameter | 1.75mm | 2.85mm | |
---|---|---|---|
Dimensional tolerance | ± 0.02mm | ± 0.03mm | |
Oval tolerance | ± 0.15mm | ± 0.02mm | |
Parameters | Typical value | Unit |
---|---|---|
Nozzle temperature | 230-250°C | °C |
Table temperature | 90-110°C | °C |
Print speed | 40-70 mm/s | mm/s |
Layer thickness | 0.2-0.3 mm | mm |
Table grip | Kapton Tape or BuildTak | - |
Cooling | Off or low | - |
Filling | 20-50% | % |
Support material | ABS or HIPS (optional) | - |
Retraction speed | 40-60 mm/s | mm/s |
Retraction value | 1-3 mm | mm |
Heat chamber | Recommended | - |
Physical properties | Typical value | Unit | Measurement method |
---|---|---|---|
Density | 1,05 | g/cm2 | ISO 1183 |
MFR, g/10 min(2) | 6 | g/10min | ASTMD1238 |
Flexural Tensile Strength/Flexural Modulus | 2300 | MPA | ISO-178 |
Charpy Notched Impact Strength | 23°C - 18 | kJ/m2 | ISO 179/1eA |
Vicat softening temperature/ Vicat Softening Temperature | 97 | °C | ISO 306/B50 |
ABS filament does not cope well with moisture and we therefore recommend storing the coils in a cool, dry environment in vacuum-sealed packaging with moisture absorbers.
RELATED PRODUCTS
Our overarching objective is to deliver on three key aspects: Production, Collaboration and Innovation, which are the foundations of our market presence.
3D KORDO ©2022 All rights reserved.