Menu
15 in stock
Everfil PLA (polylactic acid) is a biodegradable and environmentally friendly printing filament derived from renewable sources such as corn starch and sugar cane. It is one of the most popular filaments in the 3D printing market due to its ease of printing, low melting point and ability to produce smooth and accurate prints. Everil PLA is characterised by excellent adhesion to the printer substrate, low shrinkage and a wide range of colours and finishes available.
| Diameter | 1.75mm | 2.85mm | |
|---|---|---|---|
| Dimensional tolerance | ± 0.02mm | ± 0.03mm | |
| Oval tolerance | ± 0.15mm | ± 0.02mm | |
| Physical properties | Typical value | Unit | Measurement method |
|---|---|---|---|
| Specific Gravity, g/cc | 1.24 | g/cc | ASTMD792 |
| MFR, g/10 min(2) | 6 | g/10min | ASTMD1238 |
| Relative Viscosity(3) | 4.0 | °C | ASTMD5225 |
| Peak Melt Temperature, °C | 145-160 | °C | ASTMD3418 |
| Glass Transition Temperature | 55-60 | °C | ASTMD3418 |
| Parameters | Typical value | Unit |
|---|---|---|
| Nozzle temperature | 190-220 | °C |
| Table temperature | 50-70 | °C |
| Print speed | 50-100 | mm/s |
| Layer thickness | 0.1-0.3 | mm |
| Table grip | Blue Painter's Tape or BuildTak | |
| Cooling | On (50-100) % | % |
| Filling | 20-30 | % |
| Support material | Not required | |
| Retraction speed | 40-60 | mm/s |
| Retraction value | 1-3 | mm |
| Heat chamber | Not required |
PLA filament does not cope well with moisture and we therefore recommend storing the coils in a cool, dry environment in vacuum-sealed packaging with moisture absorbers.
RELATED PRODUCTS
Our overarching objective is to deliver on three key aspects: Production, Collaboration and Innovation, which are the foundations of our market presence.
3D KORDO ©2022 All rights reserved.
